Free delivery on orders over $200 Australia-wide
STEK
10-year rated film
STEK
10-year rated film
Genuine STEK ForceShield 8-mil self-healing TPU Optically clear Hydrophobic top coat 10-year rated film
Fits Zeekr 7X (2025+)
$39.00
or 4 interest-free payments of $9.75 with Afterpay
Fits: Zeekr 7X 2025+
Pre-cut to this generation’s exact panel shape. If your vehicle falls outside this range, request a custom quote and we’ll cut a kit to suit.
This is not a door cup kit. On most cars the film goes in the paint recess behind the handle — the 7X’s handles sit flush with the door, so there is no recess to protect. Instead, this film wraps the face of each pop-out handle: the exact surface your fingers, rings and keys land on every single trip.
Every grab wears the film instead of the finish, and the handles keep their factory look — the film is invisible once fitted and pops out with the handle as normal.
Pre-cut specifically for the Zeekr 7X’s flush handles. No trimming, no guesswork.
First install? Add the tools — $30
Kits ship film only. The Install Kit adds the squeegee, spray, solution and cloth.
No. The adhesive is designed to come off clean - warm the film gently, peel it back slowly and it releases without pulling paint or leaving residue. Factory paint underneath is exactly as it was, which is the point: the film takes the damage so the paint never does.
Every kit is cut from genuine STEK ForceShield, a TPU film rated for up to 10 years and engineered against yellowing, cracking and delamination. In practice the film outlasts most ownership - it is the same material professional installers use on full vehicle wraps.
Yes. The piece is already cut to your exact panel, so there is no measuring and no blade near your car. You spray, position, and squeegee - most kits take 15 to 30 minutes with our step-by-step guide. Any soft rubber-edge squeegee works - our $30 Install Kit has the squeegee, spray bottle, solution and cloth in one box, and the Essentials Bundle includes it all as standard. If it goes on crooked while wet, lift it and float it back into place.
The film self-heals. Light swirls and scuffs in the surface disappear with warmth - a sunny afternoon or warm water is usually enough. Deeper gouges that would have been paint damage stay in the film instead, which is the trade you want.